登录

ExxonMobil Teresstic 100

Lubricant

ExxonMobil

产品说明

TERESSTIC is the brand name for a line of long-service-life lubricating oils that have ranked for over five decades among the finest products of their kind. Continually improved over the years, TERESSTIC oils are formulated with carefully selected base stocks and highly effective additives, including oxidation and rust inhibitors and anti-foam agents. The TERESSTIC line of premium circulating oils consists of nine viscosity grades. Eight of these grades are blended to viscosity values that conform to the International Organization for Standardization (ISO) viscosity classification system. TERESSTIC 77 is an intermediate grade between ISO viscosity grades 68 and 100.

TERESSTIC oils are the primary recommendation for applications that require clean, dependable lubrication for extended service periods – often for years. They effectively resist high temperatures, prevent rust, and shed entrained water and air. Because the quality of TERESSTIC oils is especially apparent at sustained high temperatures and other adverse operating conditions, they are the prime lubricant recommendation for mild duty industrial gas turbines that require mineral lubricating oils. In addition, TERESSTIC oils give outstanding performance in hydraulic systems, circulating lubrication systems, gear cases, bearings, and other industrial units, where an RandO lubricant is required, for which long trouble-free service is required. Their high flash points suit TERESSTIC oils for use as heat transfer fluids in open systems. TERESSTIC 32 and 46 – These grades are formulated for applications where a premium quality grade 32 or 46 lubricant is required, but where service conditions are not severe enough to require the super-premium qualities of TERESSTIC GT 32 and 46. TERESSTIC 32 and 46 are of the same high quality as the heavier TERESSTIC grades and provide excellent performance in mild duty applications. Contamination of TERESSTIC oils with other products such as detergent motor oils may substantially impair their quality and could lead to operational problems such as foaming, filter plugging and sludge formation.

物理性能额定值 (公制)额定值 (英制)测试方法
比重 g/cc g/cc 15.6°C; ASTM D1298
API比重 ° ° 15.6°C; ASTM D1298
粘度测量 Index; ASTM D2270
赛波特粘度 100°F SUS SUS
赛波特粘度 210°F SUS SUS
运动粘度 40°C(104°F) cSt cSt ASTM D445
运动粘度 100°C(212°F) cSt cSt ASTM D445
Oxidative Stability hour hour Turbine Oil Stability Test (TOST); ASTM D943
热性能额定值 (公制)额定值 (英制)测试方法
凝点 °C °F ASTM D97
Flash Point °C °F ASTM D92
材料描述测试方法
Copper Strip Corrosion1B3 hrs @ 100°C
Demulsibility Time (min)10to 3 mL emulsion @ 82°C
Foam Sequence I, ASTM D9630/0
Foam Sequence II, ASTM D89330/0
Foam Sequence III, ASTM D8930/0
Neutralization Number, ASTM D9740.06
Rust Prevention, Distilled WaterpassASTM D665A
Rust Prevention, Synthetic Sea WaterpassASTM D665B
Copyright © souwuxing.com All Rights Reserved. 归 搜聚信息科技公司 所有
此数据表中的信息由 搜聚 从该材料的生产商处获得。搜聚 尽最大努力确保此数据的准确性。 但是 搜聚 对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。
微信小程序 搜物性手机端