Custom Age 625 PLUS® alloy is a precipitation hardenable, nickel-base alloy which, in many environments, displays corrosion resistance similar to that of Alloy 625 and superior to that of Alloy 718. A yield strength (0.2% offset) above 120 ksi (827 MPa) can be obtained by aging without prior warm or cold working. The precipitation hardening capability is particularly important in applications where large-section size or intricate shape precludes warm working. In the age hardened (high strength) condition, Custom Age 625 PLUS alloy offers exceptional resistance to stress corrosion cracking as well as general, pitting and crevice corrosion.
Custom Age 625 PLUS alloy could be considered for applications where severely corrosive environments are a concern, such as those encountered in deep sour gas wells as well as in a variety of refinery and chemical process industry applications. In addition, Custom Age 625 PLUS alloy could be considered a candidate for use in marine environments, where Alloy 625 has been used successfully. The higher strength capability of Custom Age 625 PLUS alloy may be particularly useful for fasteners and shafts. Data provided by Carpenter Technology Corporation.
Custom Age 625 PLUS® alloy is a precipitation hardenable, nickel-base alloy which, in many environments, displays corrosion resistance similar to that of Alloy 625 and superior to that of Alloy 718. A yield strength (0.2% offset) above 120 ksi (827 MPa) can be obtained by aging without prior warm or cold working. The precipitation hardening capability is particularly important in applications where large-section size or intricate shape precludes warm working. In the age hardened (high strength) condition, Custom Age 625 PLUS alloy offers exceptional resistance to stress corrosion cracking as well as general, pitting and crevice corrosion.
Custom Age 625 PLUS alloy could be considered for applications where severely corrosive environments are a concern, such as those encountered in deep sour gas wells as well as in a variety of refinery and chemical process industry applications. In addition, Custom Age 625 PLUS alloy could be considered a candidate for use in marine environments, where Alloy 625 has been used successfully. The higher strength capability of Custom Age 625 PLUS alloy may be particularly useful for fasteners and shafts.
Custom Age 625 PLUS® is a registered trademark of Carpenter Technology Corporation.
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | g/cc | lb/in³ |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 布氏硬度 | Estimated from Rockwell C for 3000 kg load, 10 mm ball Brinell measurement. | ||
| Hardness, Knoop | Estimated from Rockwell C | ||
| 洛氏硬度（C 级） | |||
| 维氏硬度 | Estimated from Rockwell C | ||
| 极限抗拉强度 | MPa | psi | |
| 抗张强度(屈服) | MPa @Strain 0.200 % | psi @Strain 0.200 % | |
| 伸长率 (断裂) | In 4D | ||
| 面积减少 | |||
| 弹性模量 | GPa @Temperature 23.0 °C | ksi @Temperature 73.4 °F |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 电阻率 | ohm-cm | ohm-cm |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线性热膨胀系数 | µm/m-°C @Temperature 25.0 - 100 °C | µin/in-°F @Temperature 77.0 - 212 °F | |
| µm/m-°C @Temperature 25.0 - 300 °C | µin/in-°F @Temperature 77.0 - 572 °F | ||
| µm/m-°C @Temperature 25.0 - 500 °C | µin/in-°F @Temperature 77.0 - 932 °F | ||
| 比热容 | J/g-°C | BTU/lb-°F | |
| 熔融温度 | °C | °F | |
| 固相线 | °C | °F | |
| 液相线 | °C | °F |
| 构成要素属性 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 铝 | |||
| 碳 | |||
| 铬 | |||
| 铁 | as remainder | ||
| 锰 | |||
| 钼 | |||
| 镍 | |||
| Niobium, Nb (Columbium, Cb) | |||
| 磷 | |||
| 硅酮 | |||
| 硫 | |||
| 钛 |