| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 比重 | g/cc | g/cc | ASTM D792 |
| 吸水率 | Immersion, 24hr; ASTM D570(2) | ||
| 饱和吸水率 | Immersion; ASTM D570(2) |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| Hardness, Rockwell E | ASTM D785 | ||
| 洛氏硬度（M 级） | ASTM D785 | ||
| 抗张强度 | MPa | psi | ASTM D638 |
| 伸长率 (断裂) | ASTM D638 | ||
| 拉伸模量 | GPa | ksi | ASTM D638 |
| 弯曲强度 | MPa | psi | ASTM D790 |
| 弯曲模量 | GPa | ksi | ASTM D790 |
| 抗压强度 | MPa | psi | 10% Def.; ASTM D695 |
| 压缩模量 | GPa | ksi | ASTM D695 |
| 剪切强度 | MPa | psi | ASTM D732 |
| 悬壁梁缺口冲击强度 | J/cm | ft-lb/in | ASTM D256 Type A |
| 动态摩擦系数 | Dry vs. Steel; QTM55007 | ||
| K (wear) Factor | x 10-8 mm³/N-M | x 10-10 in³-min/ft-lb-hr | With post-machine cure cycle; QTM 55010 |
| Limiting Pressure Velocity | MPa-m/sec | psi-ft/min | 4:1 safety factor; QTM 55007 |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 表面电阻率 | >= ohm | >= ohm | EOS/ESD S11.11 |
| 介电常数 | @Frequency 1e+6 Hz | @Frequency 1e+6 Hz | ASTM D150 |
| 耗散因数 | @Frequency 1e+6 Hz | @Frequency 1e+6 Hz | ASTM D150 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线性热膨胀系数 | µm/m-°C @Temperature -40.0 - 149 °C | µin/in-°F @Temperature -40.0 - 300 °F | ASTM E831 |
| 导热系数 | W/m-K | BTU-in/hr-ft²-°F | ASTM F433 |
| 最高工作温度, Air | °C | °F | Long Term |
| 载荷下热变形温度(1.8 MPa) | °C | °F | ASTM D648 |
| 玻璃化转变温度，Tg | °C | °F | ASTM D3418 |
| 可燃性(UL94) | 1/8 inch (Estimated Rating) |
| 合规性 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 3A-Dairy | |||
| Canada AG | |||
| FDA | |||
| NSF | |||
| USDA | |||
| USP Class VI |
| 耐化学性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| Acids, Strong (pH 1-3) | |||
| Acids, Weak | |||
| Alcohols | |||
| Alkalies, Strong (pH 11-14) | |||
| Alkalies, Weak | |||
| Chlorinated Solvents | |||
| Conductive / Static Dissipative | |||
| Continuous Sunlight | |||
| Hot Water / Steam | |||
| Hydrocarbons - Aliphatic | |||
| Hydrocarbons - Aromatic | |||
| Inorganic Salt Solutions | |||
| Ketones, Esters |
| 材料描述 | 测试方法 | |
|---|---|---|
| Machinability | 5 | 1-10, 1=Easier to Machine |