登录

DuPont™ Nomex® 410 Paper, 25.5 mil Nominal Thickness

Aramid

DuPont

产品说明

Nomex® Type 410 is a calendared insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility, and resilience. It is the original form of Nomex® paper and is widely used in a majority of electrical applications.

General NOMEX Information: Nomex® is a family of aromatic polyamide (aramid) fibers. This family consists of staple fibers, continuous filament yarns, paper, and spunlaced fabrics. The paper is produced from two forms of the aramid polymer. Small fibrous binder particles (fibrids) derived directly from the polymer under high shear conditions are mixed with short fibers (floc) which are cut to length from a fiber filament. The floc and fibrids are combined in a water based slurry from which a continuous sheet is produced on a specialized papermaking machine. This initial paper (as in Type 411) is low density and has poor properties. Subsequent densification and internal bonding is achieved by high temperature calendaring. The resulting paper is mechanically strong and has good electrical properties. Some uses for paper product include insulation in electric motors and transformers, wire wrapping, and honeycombed strength members in many aircraft. Nomex® brand fibers are inherently flame resistant: the flame resistance is a polymer property and does not diminish with the life of the fiber.

Nomex® meta-aramid, poly(meta-phenyleneisophthalamide), is prepared from meta-phenylenediamine and isophthaloyl chloride in an amide solvent. It is a long chain polyamide in which at least 85% of the amide linkages are attached directly to two aromatic rings. The meta oriented phenylene forms bends in the polymer chain, reducing chain rigidity as compared to the para orientation in the chemically similar Kevlar® chain. This flexible polymer chain gives Nomex® more textile-like qualities while retaining high temperature properties similar to Kevlar®.

Information provided by DuPont.

物理性能额定值 (公制)额定值 (英制)测试方法
体积密度 g/cc lb/in³
密度 g/cc lb/in³
厚度 microns mil Typical; ASTM D374
microns mil Nominal
机械性能额定值 (公制)额定值 (英制)测试方法
断裂伸长率,MD ASTM D828
断裂伸长率,TD ASTM D828
Tear Strength, Total N lb (f) Initial in TD; ASTM D1004
N lb (f) Initial in MD; ASTM D1004
抗张强度(MD : 断裂) MPa psi Calculated from mfr's report of 758 N/cm per ASTM D828 and the typical thickness
抗张强度(TD : 断裂) MPa psi Calculated from mfr's report of 524 N/cm per ASTM D828 and the typical thickness
电气性能额定值 (公制)额定值 (英制)测试方法
体积电阻率 ohm-cm ohm-cm 50% RH; tested on 10 mil thickness sample; ASTM D257
表面电阻率 ohm ohm tested on 10 mil thickness sample; ASTM D257
介电强度 kV/mm kV/in AC Rapid Rise; ASTM D149
热性能额定值 (公制)额定值 (英制)测试方法
最高工作温度, Air °C °F 220°C insulation by UL, the US Navy, and other tests
极限氧指数 Range at RT for Type 410; depends on thickness and density
收缩,TD at 300°C
Copyright © souwuxing.com All Rights Reserved. 归 搜聚信息科技公司 所有
此数据表中的信息由 搜聚 从该材料的生产商处获得。搜聚 尽最大努力确保此数据的准确性。 但是 搜聚 对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。
微信小程序 搜物性手机端