登录

Advanced Elastomer Systems Santoprene® 101-64 W175 Thermoplastic Rubber

Thermoplastic Elastomer, Melt-Processible Rubber

Advanced Ceramics Limited

产品说明

A black thermoplastic general purpose elastomer designed for thin wall extrusion with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and chlorosulfonated polyethylene. It can be processed using extrusion or other melt processing techniques.

Key Features: Flame resistance HB rating; Designed for thin wall extrusion applications; Continuous temperature rating 1000 hrs. @ 135°C (275°F); Excellent flex fatigue resistance; Excellent ozone resistance

Additional processing comments: This thermoplastic rubber is a shear-dependent material that can be processed on conventional thermoplastic equipment for injection molding, extrusion, or blow molding. For extrusion, a general purpose screw with a compression ratio of 2.5 to 3.0 is recommended. Material can be recycled. SANTOPRENE rubber is incompatible with acetal and PVC.

Values below are for injection molded plaques, side gated, 82.6 mm x 117.5 mm x 3.0 mm. Tensile properties measured across flow. Data provided by Advanced Elastomer Systems.

Advanced Elastomer Systems is now a part of ExxonMobil. This grade was removed from the Advanced Elastomers Systems standard product line before the ExxonMobil acquisiton.

物理性能额定值 (公制)额定值 (英制)测试方法
密度 g/cc lb/in³ TPE-0105 (ASTM D792)
机械性能额定值 (公制)额定值 (英制)测试方法
肖氏硬度 (邵氏 A) 5 Second; TPE-0169 (ASTM D 2240)
极限抗拉强度 MPa psi TPE-0153 (ASTM D 412)
伸长率 (断裂) TPE-0153 (ASTM D 412)
100% 模量 GPa ksi TPE-0153 (ASTM D 412)
Graves Tear Strength kN/m
@Temperature 100 °C
pli
@Temperature 212 °F
TPE-0056 (ASTM D 624)
kN/m
@Temperature 23.0 °C
pli
@Temperature 73.4 °F
TPE-0056 (ASTM D 624)
永久压缩 23°C, 168 hrs.; TPE-0016 (ASTM D 412)
@Temperature 100 °C
@Temperature 212 °F
168 hrs.; TPE-0016 (ASTM D 412)
Tensile Set 23°C, 168 hrs.; TPE-0053 (ASTM D 412)
热性能额定值 (公制)额定值 (英制)测试方法
最高工作温度, Air °C °F Continuous temperature Rating, 1000 hours
脆化温度<= °C <= °F TPE-0089 (ASTM D 746)
可燃性(UL94)
加工性能额定值 (公制)额定值 (英制)测试方法
加工温度 °C °F
干燥温度 °C °F Desiccant drying for 3 hours recommended
干燥时间 hour hour
Copyright © souwuxing.com All Rights Reserved. 归 搜聚信息科技公司 所有
此数据表中的信息由 搜聚 从该材料的生产商处获得。搜聚 尽最大努力确保此数据的准确性。 但是 搜聚 对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。
微信小程序 搜物性手机端