登录

EMPILON® HA60

SEBS

EMPILON

产品说明

EMPILON® HA series compound are specially designed for over-molding with engineering plastic such as ABS, PC, Nylon, PETG, PBT etc. which are commonly use in the 3C industry (Computer, Communication and Consumer electronics) as well as hand held device products for soft touch, anti-slip & vibration functional purposes. Hydrogenated Styrenic Block Copolymer is the main content of this HA series compound, its hardness range is from Shore A 52 to 77. They can be processed by Double injection and co-extrusion machines or ordinary plastic injection machines with an insert molding process.

EMPILON® HA-series compound are non-toxic and free of Pb, Cd, Hg, Cr6+, Sb, As, Ba, Se, halogen and DOP plasticizer, they also comply with the Restriction of the use of certain Hazardous Substance directive in electrical and electronic equipment (RoHS 2002/95/EC) and SONY SS-00259 4th that prohibit products that contain Pb, Cd, Hg, Cr6+, PBB and PBDE etc. They are 100% recyclable and comply with the Waste Electrical and Electronic Equipment directive (WEEE 2002/95/EC).

EMPILON® HA-series compound retain good mechanical properties after heating, weathering and solvent resistance testing and won't hydrolyze in water. They need 80°C ~ 90°C dehumidified hot air at least 2 hours before any molding process and need to be continually dried during operation. The HA series are Opaque or Transparent type in nature. For coloring, please select color master batch based on PE or EVA material with the exception of PVC. Higher screw speed and backpressure are necessary for better colorant dispersion.
基本信息
特性
  • Block Copolymer
  • 低(至无)铅含量
  • 钙含量,低(到无)
  • 可回收材料
  • 耐水解性
  • 无毒性
  • 无卤
  • 无锑
用途
  • 包覆成型
  • 柔软触感应用
RoHS 合规性
  • RoHS 合规
形式
  • 粒子
加工方法
  • 共挤出成型
  • 注射成型
物理性能额定值单位制测试方法
比重 g/cm³ASTM D792
熔流率(熔体流动速率) (200°C/5.0 kg)g/10 minASTM D1238
收缩率 1
    流动 %
    横向流动 %
硬度额定值单位制测试方法
肖氏硬度 (邵氏 A, 10 秒)ASTM D2240
弹性体额定值单位制测试方法
拉伸应力 (300%应变)MPaASTM D412
抗张强度 MPaASTM D412
伸长率 (断裂)%ASTM D412
压缩永久变形 (23°C, 70 hr)%ASTM D395
老化额定值单位制测试方法
空气中拉伸强度的变化率 (125°C, 168 hr)%ASTM D573
空气中极限伸长率的变化率 (125°C, 168 hr)%ASTM D573
空气中硬度计硬度的变化率 (支撐 A, 125°C, 168 hr)ASTM D573
热性能额定值单位制
脆化温度 °C
补充信息额定值单位制
Adhesion to ABS kN/m
Adhesion to PC kN/m
注射额定值单位制
Screw Speed
干燥温度 °C
干燥时间 hr
料筒后部温度 °C
料筒中部温度 °C
料筒前部温度 °C
射嘴温度 °C
加工(熔体)温度 °C
模具温度 °C
注塑压力 MPa
注射速度
背压 MPa
注射说明
Hold Time: 5 sec.Cycle Time: 15~30 sec.
备注
1 .Reference Only
Copyright © souwuxing.com All Rights Reserved. 归 搜聚信息科技公司 所有
此数据表中的信息由 搜聚 从该材料的生产商处获得。搜聚 尽最大努力确保此数据的准确性。 但是 搜聚 对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。
微信小程序 搜物性手机端