Prixene® EL010E20S

Prixene® EL010E20S is a butane linear low density polyethylene resin for general purpose applications. Films produced from this resin are tough with excellent puncture resistance, high tensile strength and good hottack properties. The resin contains anti block and slip erucamide. Typical applications are shipping sacks, ice bags, frozen food bags, liners, carrier bags, garbage bags, agriculture films, lamination and coextruded films, etc.

The features presented are an excellent processability, good tenacity, low density, high resistance and good thermo sealing.

The product form is in pellets. LLDPE for film extrusion and coextrusion. The material does not contain additives. The material complies with FDA regulation title 21.CFR177.1520 (. C) 3.2a

基本信息
添加剂	芥酸酰胺润滑添加剂 抗结块剂
特性	低密度 抗撞击性，良好 可加工性，良好 良好的强度 良好的热封性
用途	薄膜 层压板 袋子 食品包装 通用
机构评级	FDA 21 CFR 177.1520(c) 3.2a
形式	粒子
加工方法	共挤出成型 挤出

物理性能	额定值	单位制	测试方法
密度		g/cm³	ASTM D1505
熔流率（熔体流动速率） (190°C/2.16 kg)		g/10 min	ASTM D1238

薄膜	额定值	单位制	测试方法
割线模量			ASTM D882
1% 正割, MD : 25 µm		MPa	ASTM D882
1% 正割, TD : 25 µm		MPa	ASTM D882
抗张强度			ASTM D882
MD : 屈服, 25 µm		MPa	ASTM D882
TD : 屈服, 25 µm		MPa	ASTM D882
MD : 断裂, 25 µm		MPa	ASTM D882
TD : 断裂, 25 µm		MPa	ASTM D882
伸长率			ASTM D882
MD : 断裂, 25 µm		%	ASTM D882
TD : 断裂, 25 µm		%	ASTM D882
落锤冲击 (25 µm)		g	ASTM D1709A

光学性能	额定值	单位制	测试方法
光泽度 (45°, 24.9 µm, 吹塑薄膜)			ASTM D2457
雾度 (24.9 µm)		%	ASTM D1003