登录

Petrothene® Select GS710062

LLDPE

LyondellBasell Industries

产品说明

The PETROTHENE SELECT series of resins are pelletized, high performance hexene, linear low density polyethylenes for applications requiring superior strength and toughness. These products offer significant improvements in mechanical properties and excellent additive homogeneity without sacrificing processability compared to conventional Hexene LLDPE materials. GS 710 exhibits superior processability compared to competitive High Performance Hexene LLDPE materials. Applications include trash and can liners, commercial and industrial packaging, as well as consumer packaging. The PETROTHENE SELECT series resins offer enhanced film strength, drawdown, toughness and heat seal strength.
基本信息
添加剂
  • 抗结块剂 (1%)
  • 增滑剂 (1350 ppm)
特性
  • 光滑性
  • 己烯共聚单体
  • 抗结块性
  • 可加工性,良好
  • 良好的剥离性
  • 良好的强度
  • 良好的热封性
  • 韧性良好
  • 食品接触的合规性
用途
  • 包装
  • 衬里
  • 工业应用
机构评级
  • FDA 21 CFR 177.1520(c) 3.1a
形式
  • 粒子
加工方法
  • 薄膜挤出
物理性能额定值单位制测试方法
密度 g/cm³ASTM D1505
熔流率(熔体流动速率) (190°C/2.16 kg)g/10 minASTM D1238
薄膜额定值单位制测试方法
薄膜厚度 - 经测试 µm
割线模量 ASTM D882
    1% 正割, MD : 25 µm MPaASTM D882
    1% 正割, TD : 25 µm MPaASTM D882
抗张强度 ASTM D882
    MD : 断裂, 25 µm MPaASTM D882
    TD : 断裂, 25 µm MPaASTM D882
伸长率 ASTM D882
    MD : 断裂, 25 µm %ASTM D882
    TD : 断裂, 25 µm %ASTM D882
落锤冲击 (25 µm, 吹塑薄膜)gASTM D1709A
埃尔曼多夫抗撕强度 ASTM D1922
    MD : 25 µm gASTM D1922
    TD : 25 µm gASTM D1922
补充信息
Film properties taken from blown film produced on a blown film line equipped with an 8 in diameter die and 100 mil die gap, running at 150 lb/hr and 420°F melt temperature.Density of Base Resin, ASTM D1505: 0.915 g/cm³Density of Compound, ASTM D1505: 0.924 g/cm³
挤出额定值单位制
熔体温度 °C
Copyright © souwuxing.com All Rights Reserved. 归 搜聚信息科技公司 所有
此数据表中的信息由 搜聚 从该材料的生产商处获得。搜聚 尽最大努力确保此数据的准确性。 但是 搜聚 对这些数据值不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。
微信小程序 搜物性手机端